Audiocenter Artist T4 Full-Range Speaker: 100V and 16 ohm, 60W
The Audiocenter Artist T4 is a compact full-range speaker with a lot of output for its size. It has a customised 4-inch driver and two 1-inch dome tweeters in a small cabinet, and a built-in switch lets you run it on a 70V or 100V line, or direct from an amplifier at 4~16 ohms. The wall-mount bracket is included. The 16 ohm impedance means you can connect up to 4 of these in parallel off each channel of a normal power amplifier to create 4 ohm load.
It suits the places where you need clear speech and background music without a big speaker: cafes, restaurants, shops, meeting rooms, classrooms, corridors and reception areas.
Key features
- 70V, 100V and 16 ohm: choose the voltage or impedance output with the built-in switch, and select the power tap you need. 60W at 16 ohms. On 70V: 20W, 10W, 5W or 2.5W. On 100V: 20W, 10W or 5W.
- T-eye design: two dome tweeters sit together in the centre of the front panel, giving a wider frequency response, wider near-field coverage and smoother sound than a single-tweeter speaker of this size.
- Wide, even coverage: 110° horizontal and 100° vertical, so the sound reaches more of the room from one speaker.
- Plenty of level for its size: up to 110dB continuous and 116dB peak maximum calculated SPL at 1 metre.
- Built to last: durable polyurea coating and an iron mesh grille.
- Wall bracket included: adjust the angle horizontally and vertically to aim the sound where the listeners are.
- Small and light: 154 x 174 x 158mm and 2.5kg.
Where it is used
- Hospitality and retail: background music and announcements, where a speaker needs to stay discreet.
- Offices, schools and meeting rooms: clear speech and presentation audio from a speaker mounted on the wall.
- Distributed line systems: several speakers on one 70V or 100V amplifier line, using the power taps to balance the level in each area.
The frequency response starts at 110Hz, which suits speech and background music. For music with deep bass, add a subwoofer. For longer, narrower spaces, see the Audiocenter T43 column speaker.
Specifications
| Type | Full-range speaker, passive |
| HF driver | 2 x 1" dome tweeters, customised, in T-eye array |
| LF driver | 4" customised neodymium driver |
| Frequency response (-10dB) | 110Hz - 20kHz |
| Coverage (H x V) | 110° x 100° |
| Power at 16 ohms | 60W |
| 70V taps | 20W / 10W / 5W / 2.5W |
| 100V taps | 20W / 10W / 5W |
| Max SPL at 1m (continuous / peak) | 110dB / 116dB |
| Rated impedance | 16 ohms |
| Crossover | Passive |
| Input connector | Euroblock |
| Cabinet and finish | Wood and plastic, polyurea coating, iron mesh grille, black |
| Dimensions (W x H x D) | 154 x 174 x 158mm |
| Net weight | 2.5kg |
| Included | Wall-mount bracket |
Frequently asked questions
Can the Artist T4 be used on a 70V or 100V line?
Yes. It has a built-in switch for the voltage or impedance output. On 70V you can choose 20W, 10W, 5W or 2.5W, and on 100V you can choose 20W, 10W or 5W. It can also be driven directly at 16 ohms, up to 60W.
Does it come with a wall bracket?
Yes. The wall-mount bracket is included and lets you adjust the angle of the speaker horizontally and vertically.
What does the T-eye design do?
Two dome tweeters are mounted together in the centre of the front of the speaker. Audiocenter designed this to give a wider frequency response, wider coverage close to the speaker and smoother sound.
How many Artist T4 speakers can I run from one amplifier?
On a 70V or 100V line, add up the power tap you have set on each speaker. The total must stay below the amplifier's rated output. For example, ten speakers set to 10W need a 100W amplifier. If you are unsure, contact us with your plan and we will check it.
Is it suitable for music with deep bass?
The Artist T4 reproduces from 110Hz, so it is best for speech and background music. For music with strong bass, add a subwoofer.
Need help choosing speakers or an amplifier? Contact us and we will help you design the system.