Netbell IN-608 IP Intercom Door/Call Station

IP Intercom Door/Call Station

Transform your facility's communication with this robust IP intercom door/call station. Perfect for warehouses, manufacturing floors, office complexes, and any facility requiring instant, clear communication.  

As every Linortek IP speaker and endpoint has a unique network IP address and ID, allowing you to communicate exactly where needed. When using this intercom terminal with your IP speakers, you can make it to talk to all zones, target specific areas, or reach individual speakers, our flexible system lets you deliver the right message to the right audience.

This single-button terminal combines advanced digital audio technology with TCP/IP networking for crystal-clear communication. It comes with a built-in 3W speaker, one push button and one 30W speaker output for connecting external 8Ω speakers when you need audio coverage across large areas.

Key Features

• High-reliability audio communication system
• Weatherproof design for indoor/outdoor installation
• 10/100M Ethernet interface for seamless network integration
• Anti-collision with robust die-cast aluminum frame, suitable for wall mounting or surface installation
• Built-in 3W speaker and microphone, supports hands-free operation and broadcast reception
• Direct speaker output: Built-in 30W amplifier allows direct connection of 8Ω speakers without requiring an external amplifier
• Can receive network broadcasts, paging, and intercom communications
• Flexible communication modes: point-to-point or point-to-multi-point
• Simple single-button operation, can be used for two-way communication

To use this IP intercom door/call station to build a facility-wide two-way communication system, you can pick one or more speakers that fit your needs from the featured product below to build your custom paging system, or an IP call station for 2-way communication.

Download the Brochure

Linortek IN-608 IP Intercom Terminal Unit Brochure

Important Requirements

To achieve the best audio quality for your IP paging system, we recommend building a dedicated VLAN for this system with network equipment compatible with multicast protocol. Netbell IP paging devices support PoE/PoE+, and a properly configured network infrastructure will ensure a smooth installation.

• The speakers and the PC running the NACT desktop app must be on the same LAN
• Network and Switch Requirements:
  • Power over Ethernet (PoE/PoE+) Switch Ports
  • Minimum CAT5 cable with maximum of 100 meters from the device to switch
  • Network switch capacity to handle power loads for all devices
  • Router: Must support IGMP (Internet Group Management Protocol) and PIM (Protocol Independent Multicast)
  • Switch: Must support IGMP snooping