The new Aero 8A was designed to provide audio professionals with exceptional line array performance from an ultra-compact enclosure. Measuring only 24.5 x 52.6 x 35.5 cm (9.6 x 20.7 x 14 in), the easy to handle units can be configured into arrays that are both powerful and predictable. Equipped with the latest in Class D power amplification and digital signal processing, the amplifier offers 250 W for the low frequency loudspeaker and 100 W for the high frequency driver. A two position HF EQ compensation switch which adjusts the high frequency response for arrays of 4 or 8 or more units is located on the rear panel. The Aero 8A incorporates the D.A.S. 8MN, 8? low frequency transducer. The 8MN employs a 62 mm (2.5?) voice coil and neodymium magnet motor assembly. High frequency reproduction relies on the exceptional characteristics of the new M-60N neodymium compression driver. Each motor system is attached to a new BPS-191 waveguide-horn assembly. The Aero8A is a powered ultra-compact two-way line array module - Class D two channel amplifier 250 W LF + 100 W HF - One 8? loudspeaker with neodymium magnet assembly - New M-60N Neodymium compression driver - SERPIS BPS-191 high frequency plane wave generator - Captive rigging system integrated in the cabinet design The extremely compact enclosure is manufactured using birch plywood protected with the durable Iso-Flex black paint. The Aero 8A´s 5º trapezoidal shape and rear located splay angle adjusters keep the front spacing between adjacent elements the same, providing the array with a “seamless” front baffle, for improved array performance. The captive rigging system splay angles range from 0º to 10º and can be adjusted in 1º increments allowing a wide range of column curvatures to be accomplished.